Since I was a teenager, I frequently heard stories that some guy had invented a car that could get 100 miles per gallon (MPG), but that powerful interests (often GM, Chevron, etc.) had bought rights to the idea and sat on it. We suckers were left to shell out major bucks for gasoline, when a solution was in hand and under wraps.
Leaving aside the notion that such a design would bring unbelievable prosperity to its holder (i.e., no real incentive to sit on it), letâs look at what physics says is possible.
We like cars because we can travel quickly from point A to point B. So letâs evaluate the energy requirements to make that journey at freeway speeds. We will use the somewhat awkward (although appropriate) speed of 67 m.p.h. because it conveniently maps to 30 meters per second. At these speeds, aerodynamic resistance is the dominant energy drain, so we will start by evaluating only this to get a lower bound on fuel efficiency, and find that we do a pretty good job!
What a Drag!
As long as your car is bigger than a dust grain, air resistance increases as the square of velocity. This is because in the carâs frame of reference, with an oncoming âwind,â the kinetic energy in the âwindâ that the car disrupts depends on the square of the air velocity. If the car had no aerodynamic attributes (like a sheet of plywood face-on to the flow), it would basically rob the oncoming column of air of all its kinetic energy.
If the distance traveled is D, the car sweeps out a volume of air during its travel equal to the cross-sectional area of the car, A, times the travel distance, D. To make this more explicit, a car with a frontal area of 3 square meters (2 meters wide and 1.5 meters tall) traveling 25 miles (40 km) will impact a tube of air with base area 3 m2 and 40,000 meters long. The kinetic energy in this tube is ½mv², where m is the mass of the air involved. We already know that the volume of the air impacted is Aâ¢D, so its mass is just the volume times the density of air, which we will call ?. At sea level, ?=1.3 kg/m3 for air (for reference, water has a density of 1000 in these units).
Putting these together, a tragically un-aerodynamic car would see a drain of energy of Edrag=½(?AD)v², where the term in parentheses is the mass of the air involved. A real car has better aerodynamic performance than a piece of plywood, so we include a term called the drag coefficient, cD, and the energy expended on fighting air for the journey becomes Edrag=½cD?ADv². The drag coefficient for cars ranges from 0.25 for a Prius to numbers like 0.5â0.6 for SUVs and pickup trucks. Loads of sedans come in around cD=0.3, so weâll use that number for the present analysis.
Heat Engines and Gasoline
We, of course, get the energy to fight air resistance by burning gasoline in our engines. Automobile engines constitute heat engines, whose thermodynamic efficiency is bounded by limitations on entropy to be no more than 100Ã(Th ? Tc)/Th percent, where Th and Tc are the hot and âcoldâ temperatures (in Kelvin) that the engine operates between. This, plus practical limitations, puts most automobile engines in the range of 15â25%. If we could achieve an ideal heat engine operating between the volume-averaged explosion temperature of around 1200°K (my guess) and the ambient 300°K, weâd have an efficiency of 75%. But the exhaust manifoldâacting as the âcoldâ temperature for the cylinderâis much warmer than ambient temperature, and the cylinder walls moderate the effective hot temperature to reduce the theoretically achievable efficiency. A turbo-pump can use the hot exhaust to recover some of the lost energy flow and achieve better performance.
Gasoline delivers 36.6 kWh (132 MJ) per gallon. Used at 20% efficiency, this translates to Edeliv=26 MJ (megajoules) of energy actually delivered to the drive train per gallon burned.
Our Calculated Mileage
We are now in a position to calculate how many miles we can expect to travel per gallon of gasoline. Setting the energy delivered by a gallon of gas equal to the energy required to overcome air resistance: Edeliv=½cD?ADv² and solving for D using the values sprinkled above, we find that D=50,000 m, or 50 km, or 31 miles. So our hypothetical air-resistance-only car gets 31 MPG at freeway speeds. Seems completely reasonable. Weâll adjust this and all other air-resistance-only calculations later for rolling resistance.
Pushing Limits
What could we do to improve mileage? The simplest option is to slow down. The quadratic dependence on velocity is striking, and this is where the biggest, easiest gains may be had. But we like to engineer our way to a solution, not change behaviors. So the knobs are: engine efficiency; coefficient of drag; and frontal area. The best, weird-looking concept cars achieve drag coefficients around 0.15. If we were willing to live with trout-shaped cars, we might get cD down to a bit less than 0.1. Diesel engines operate at a higher temperature and get better thermodynamic efficiency. The best of the best (in train locomotives and large ships) get 50%. For a gasoline engine made from steel, 30% would be a stretch. Decreasing frontal area is not usually compatible with our need to transport multiple people. If we were willing to sit single-file, we could do the trout shape with low frontal area. We might even stop hearing âstop touching me!â from the back seat. I will point out that trout cars would be a real pain to parallel park, necessarily being pretty longâwith much of the length in a tail section that is too narrow to be of much use.
As a fantastical example, using A=1.5 m², cD=0.1, and engine efficiency at 50%, we get the astounding fuel economy number of 466 MPG. But youâre not going to get a locomotive-performance engine in a 1.5 square meter trout-car. A more practical set of limits given our behavioral and aesthetic preferences might be A=2.5 m², cD=0.2, and 30% engine efficiency. This puts us at 84 MPG. Not a bad place to be, but shy of the magic 100 MPG. And even this is not a snap: note that we are nowhere close to this mark at present.
How does the Prius today get a fuel economy in the low 50?s? The drag coefficient is on the low side, at 0.25. The area is small-ishâI estimate 2.5 m², and the big trick is that the engine can be optimized for freeway speeds since the battery can assist acceleration at lower speeds. Traditional cars sacrifice freeway efficiency for the get-up-and-go performance that is so important in test drives. If I use 25% engine efficiency with the aforementioned values, I get 56 MPG.
What About Rolling Resistance?
We have so far neglected rolling resistance (mainly from tires) in this analysis, primarily to keep things simple while capturing the dominant contributor to fuel economy at freeway speeds. At a rolling friction coefficient of 0.01, a 1 ton car (1000 kg; 10,000 Newtons) requires 100 Newtons of force to push alongâindependent of velocity. This effect alone (e.g., driving in a vacuum) would result in a limit of 160 MPG at a 20% engine efficiency. At 30 m/s (67 m.p.h.) in air, factoring in rolling resistance: our 31 MPG sedan becomes 26 MPG; our 56 MPG Prius becomes 45 MPG; our absurd locomotive trout car at 466 MPG becomes 220 MPG; and our ârealisticâ 84 MPG car now gets 63 MPG.
ADVERTISEMENT
But keep in mind that these numbers are not to be taken too literally. We made plenty of round-number estimates for frontal area, engine efficiency, etc. The numbers are reasonable and give us a framework for understanding approximate limits. So I donât want to hear anyone speaking of 63 MPG as a meaningful hard limit. Itâs ballpark. Itâs useful. Lots of details could be added to the analysis, but weâve already captured the essence of the problem.
The Point of it All
The purpose of this post is to illustrate that fuel efficiency on the freeway is not mysterious. Itâs the air, stupid. We have few knobs to turn, and are limited in how much more we can turn them. The biggest disappointment, perhaps, is the typical 20% performance of our engines. Naïvely, this suggests a factor of five potential gain. But as long as weâre making fireballs in our cylinders, weâre limited by harsh thermodynamic realities. A future post will deal with the potential of electric cars. Weâll have to abandon gallons as a measure (and when we do, we should also flip the measure to be energy per distance, opposite our familiar MPG).
By. Tom Murphy
This is a guest post by Tom Murphy. Tom is an associate professor of physics at the University of California, San Diego. This post originally appeared on Tom's blog Do the Math.